1999
Brunner, S. Müller, P., Fottner, L.:
Turbomachichery Research at the Jet Propulsion Institute of the University of the Federal Armed Forces Munich
ERCOFTAC Bulletin No. 42,(1999), pp 19-30
Turbomachichery Research at the Jet Propulsion Institute of the University of the Federal Armed Forces Munich
ERCOFTAC Bulletin No. 42,(1999), pp 19-30
Hu, J., Peters, Th., Fottner, L.:
Numerical Simulation of Flow Instabilities in High Speed Multistage Compressors
Journ. of Thermal Science Vol. 8, No. 1, pp 23-31 (1999)
Numerical Simulation of Flow Instabilities in High Speed Multistage Compressors
Journ. of Thermal Science Vol. 8, No. 1, pp 23-31 (1999)
Brunner, S., Fottner, L.:
Untersuchungen zum Einfluß der Rotor/Stator-Interaktion auf die saugseitige Transition eines hochbelasteten ungekühlten Niederdruck-Turbinengitters
DGLR Jahrestagung 1999, Berlin
Untersuchungen zum Einfluß der Rotor/Stator-Interaktion auf die saugseitige Transition eines hochbelasteten ungekühlten Niederdruck-Turbinengitters
DGLR Jahrestagung 1999, Berlin
Schmid, N.R., Leinhos, D.C., Fottner, L.:
Performance of a Turbofan Engine with Inlet Distortions from the Intake Diffuser of a Combined Cycle Engine for Hypersonic Flight
ISABE Paper IS-7076, Florenz, Italy (1999)
Performance of a Turbofan Engine with Inlet Distortions from the Intake Diffuser of a Combined Cycle Engine for Hypersonic Flight
ISABE Paper IS-7076, Florenz, Italy (1999)
Leipold, R., Boese, M., Fottner, L.:
The Influence of Technical Surface Roughness of Modern Blade Manufacturing Methods on the Flow Around a Compressor Cascade
ISABE Paper IS-7019, Florenz, Italy (1999)
The Influence of Technical Surface Roughness of Modern Blade Manufacturing Methods on the Flow Around a Compressor Cascade
ISABE Paper IS-7019, Florenz, Italy (1999)
Teusch, R., Fottner, L., Swoboda, M.:
Experimental Investigation of Wake-Induced Transition in a Linear Compressor Cascade with Controlled Diffusion Blading
ISABE Paper IS-7057, Florenz, Italy (1999)
Experimental Investigation of Wake-Induced Transition in a Linear Compressor Cascade with Controlled Diffusion Blading
ISABE Paper IS-7057, Florenz, Italy (1999)
Duden, A., Fottner, L.:
The Secondary Flow Field of a Turbine Cascade with 3D Airfoil Design and Endwall Contouring at Off-Design Incidence
ASME 99-GT-211 (1999)
The Secondary Flow Field of a Turbine Cascade with 3D Airfoil Design and Endwall Contouring at Off-Design Incidence
ASME 99-GT-211 (1999)
Ganzert, W., Fottner, L.:
Film Cooling Over a Concave Surface Through a Row of Expanded Holes
ASME 99-GT-039 (1999)
Film Cooling Over a Concave Surface Through a Row of Expanded Holes
ASME 99-GT-039 (1999)
Jahnen, W., Peters, T., Fottner, L.:
Stall Inception in a 5 stage HP Compressor with Increased Load Due to Inlet Distortion
ASME 99-GT-440 (1999)
Stall Inception in a 5 stage HP Compressor with Increased Load Due to Inlet Distortion
ASME 99-GT-440 (1999)
Leipold, R., Boese, M., N. Fottner, L.:
The Influence of Technical Surface Roughness on the Flow around a Highly Loaded Compressor Cascade
ASME 99-GT-366 (1999)
Journal of Turbomachinery Vol. 122 No. 3 416-425
The Influence of Technical Surface Roughness on the Flow around a Highly Loaded Compressor Cascade
ASME 99-GT-366 (1999)
Journal of Turbomachinery Vol. 122 No. 3 416-425
Schwarz, C., Schmid, N. Fottner, L.:
Model Wind-Tunnel Tests for the Optimisation of the Flow Field inside the Subsonic Diffuser of an Intake for a Combined Cycle Engine for Hypersonic Flight
Conference Proceedings of the 1999 European Propulsion Forum, Pau, France, (1999)
Model Wind-Tunnel Tests for the Optimisation of the Flow Field inside the Subsonic Diffuser of an Intake for a Combined Cycle Engine for Hypersonic Flight
Conference Proceedings of the 1999 European Propulsion Forum, Pau, France, (1999)
Wolff, St., Ardey, S., Fottner, L.:
Proposal for a New ERCOFTAC Test Case: Leading Edge Film Cooling on a Large High Pressure Turbine Cascade
ERCOFTAC Workshop 04-07 January 1999, Aussois (1999)
Proposal for a New ERCOFTAC Test Case: Leading Edge Film Cooling on a Large High Pressure Turbine Cascade
ERCOFTAC Workshop 04-07 January 1999, Aussois (1999)
Brunner, S., Teusch, R., Fottner, L., Schiffer, H.-P., Swoboda, M.:
Optimierung hochbelasteter Turbinen- und Verdichterbeschaufelungen mit Berücksichtigung instationärer Zuströmung
6. Statusseminar AG TURBO DLR Köln (1998)
Optimierung hochbelasteter Turbinen- und Verdichterbeschaufelungen mit Berücksichtigung instationärer Zuströmung
6. Statusseminar AG TURBO DLR Köln (1998)
Brunner, S., Fottner, L., Schulte, V., Kappler, G.:
Investigation of Wake-Induced Transition on a Highly Loaded Low Pressure Turbine Cascade
Conf. Proc. of 3nd European Conference on Turbomachinery, 2-5 March 1999 C557/068/99, London, UK (1999)
Investigation of Wake-Induced Transition on a Highly Loaded Low Pressure Turbine Cascade
Conf. Proc. of 3nd European Conference on Turbomachinery, 2-5 March 1999 C557/068/99, London, UK (1999)
1998
Swoboda, M., Teusch, R., Fottner, L., Gümmer, V., Wenger, U.:
Experimentelle Untersuchung zum Transitionsverhalten in Verdichtergittern mit periodisch veränderlicher Zuströmung
STAB Fachsymposium Berlin, 1998
Experimentelle Untersuchung zum Transitionsverhalten in Verdichtergittern mit periodisch veränderlicher Zuströmung
STAB Fachsymposium Berlin, 1998
Ganzert, W., Fottner, L.:
Untersuchungen des Wärmeübergangs an einem filmgekühlten Turbinengitter im Hochgeschwindigkeits-Gitterwindkanal
DGLR Jahrestagung 1998, Bremen
Untersuchungen des Wärmeübergangs an einem filmgekühlten Turbinengitter im Hochgeschwindigkeits-Gitterwindkanal
DGLR Jahrestagung 1998, Bremen
Schmid, N., Hildebrandt, Th., Fottner, L.:
Numerical Investigations of the Flow Field Inside the Intake Diffuser of a Combined Cycle Engine for Hypersonic Flight
4th ECCOMAS Computational Fluid Dynamics Conference, Athens, September 1998
Numerical Investigations of the Flow Field Inside the Intake Diffuser of a Combined Cycle Engine for Hypersonic Flight
4th ECCOMAS Computational Fluid Dynamics Conference, Athens, September 1998
Leipold, R., Fottner, L.:
A Measurement Technique to Investigate the Influence of Surface Roughness on the Flow around a Highly Loaded Compressor Cascade
14th Symposium on Measuring Techniques for Transonic and Su-personic Flow in Cascades and Turbomachines, Limerick, September 1998
A Measurement Technique to Investigate the Influence of Surface Roughness on the Flow around a Highly Loaded Compressor Cascade
14th Symposium on Measuring Techniques for Transonic and Su-personic Flow in Cascades and Turbomachines, Limerick, September 1998
Brunner, S., Teusch, R., Stadtmüller, P., Fottner, L.:
The Use of Simultaneous Surface Hot Film Anemometry to Investigate Unsteady Wake Induced Transition in Turbine and Compressor Cascades
14th Symposium on Measuring Techniques for Transonic and Su-personic Flow in Cascades and Turbomachines, Limerick, September 1998
The Use of Simultaneous Surface Hot Film Anemometry to Investigate Unsteady Wake Induced Transition in Turbine and Compressor Cascades
14th Symposium on Measuring Techniques for Transonic and Su-personic Flow in Cascades and Turbomachines, Limerick, September 1998
Höss, B., Leinhos, D., Fottner, L.:
Stall Inception in the Compressor System of a Turbofan Engine
ASME 98-GT-475 (1998)
Stall Inception in the Compressor System of a Turbofan Engine
ASME 98-GT-475 (1998)
Hildebrandt, Th., Fottner, L.:
A Numerical Study of the Influence of Grid Refinement and Turbulence Modelling on the Flow Field inside a Highly Loaded Turbine Cascade
ASME 98-GT-240 (1998)
A Numerical Study of the Influence of Grid Refinement and Turbulence Modelling on the Flow Field inside a Highly Loaded Turbine Cascade
ASME 98-GT-240 (1998)
Duden, A., Raab, I., Fottner, L.:
Controlling the Secondary Flow in a Turbine Cascade by 3D Airfoil Design and Endwall Contouring
ASME 98-GT-072 (1998)
Controlling the Secondary Flow in a Turbine Cascade by 3D Airfoil Design and Endwall Contouring
ASME 98-GT-072 (1998)
Dohring, Cl., Fottner, L., Platzer, M. F.:
Experimental and Numerical Investigations of Flapping Wing Propulsion and its Application for Boundary-Layer Control
ASME 98-GT-046 (1998)
Experimental and Numerical Investigations of Flapping Wing Propulsion and its Application for Boundary-Layer Control
ASME 98-GT-046 (1998)
Ardey, S., Fottner, L.:
A Systematic Experimental Study on the Aerodynamics of Leading Edge Film Cooling on a Large Scale High Pressure Turbine Cascade
ASME 98-GT-434 (1998)
A Systematic Experimental Study on the Aerodynamics of Leading Edge Film Cooling on a Large Scale High Pressure Turbine Cascade
ASME 98-GT-434 (1998)
Leinhos, D., Höss, B., Fottner, L.:
Rotating Stall Inception with Inlet Distortion in the Low Pressure Compressor of a Turbofan Engine
19th Int. Symp. Aircraft Integrated Monitoring Systems, May 1998 Garmisch-Partenkirchen (1998)
Rotating Stall Inception with Inlet Distortion in the Low Pressure Compressor of a Turbofan Engine
19th Int. Symp. Aircraft Integrated Monitoring Systems, May 1998 Garmisch-Partenkirchen (1998)
1997
Höss, B., Fottner, L.:
Experimental Set-Up, Measurement and Analysis of the Onset of Compressor Flow Instabilities in an Aero Engine
17th Int. Congr. on Instrumentation in Aerospace Simulation Facilities, Monterey, USA (1997)
Experimental Set-Up, Measurement and Analysis of the Onset of Compressor Flow Instabilities in an Aero Engine
17th Int. Congr. on Instrumentation in Aerospace Simulation Facilities, Monterey, USA (1997)
Ganzert, W., Fottner, L.:
Set-Up of a Heat Transfer Coefficient Measurement System at the High Speed Cascade Wind Tunnel
Eurotherm Seminar No. 55 on "Heat Transfer in Single Phase Flows", Santorin, Greece (1997)
Set-Up of a Heat Transfer Coefficient Measurement System at the High Speed Cascade Wind Tunnel
Eurotherm Seminar No. 55 on "Heat Transfer in Single Phase Flows", Santorin, Greece (1997)
Jahnen, W., Peters, Th., Fottner, L.:
An Experimental Flow Investigation of an HP Five-Stage Compressor Exhibiting Rotating Stall due to Distorted Inlet Flow Conditions
8th Int. Symp. on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, Stockholm, Sweden (1997)
An Experimental Flow Investigation of an HP Five-Stage Compressor Exhibiting Rotating Stall due to Distorted Inlet Flow Conditions
8th Int. Symp. on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, Stockholm, Sweden (1997)
Acton, P., Fottner, L.:
Investigation of the Boundary Layer Development on a Highly Loaded Low Pressure Turbine Cascade under the Influence of Unsteady Flow Conditions
8th Int. Symp. on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, Stockholm, Sweden (1997)
Investigation of the Boundary Layer Development on a Highly Loaded Low Pressure Turbine Cascade under the Influence of Unsteady Flow Conditions
8th Int. Symp. on Unsteady Aerodynamics and Aeroelasticity of Turbomachines, Stockholm, Sweden (1997)
Schnaus, J., Fottner, L.:
Experimental and Numerical Investigations of the Influence of Endwall-Inclination and Contouring on the Flow Field in a Highly Loaded Turbine Cascade
ISABE Chattanooga, USA (1997)
Experimental and Numerical Investigations of the Influence of Endwall-Inclination and Contouring on the Flow Field in a Highly Loaded Turbine Cascade
ISABE Chattanooga, USA (1997)
Bohn, D., Becker, V., Kusterer, K., Ardey, S. Fottner, L.:
The Influence of Slot Ejection and Showerhead Ejection on the 3D Flowfield of a Film-Cooled Turbine Blade under Consideration of Side Wall Effects
ISABE Chattanooga, USA (1997)
The Influence of Slot Ejection and Showerhead Ejection on the 3D Flowfield of a Film-Cooled Turbine Blade under Consideration of Side Wall Effects
ISABE Chattanooga, USA (1997)
Ardey, S., Fottner, L.:
Flow Field Measurements on a Large Scale Turbine Cascade with Leading Edge Film Cooling by Two Rows of Holes
ASME 97-GT-524 (1997)
Flow Field Measurements on a Large Scale Turbine Cascade with Leading Edge Film Cooling by Two Rows of Holes
ASME 97-GT-524 (1997)
Fottner, L. (Edt.):
Design of Aero Engines for Safety, Reliability, Maintainability and Cost
Conference Proceedings of the 1997 European Propulsion Conference, Berlin, (1997)
Design of Aero Engines for Safety, Reliability, Maintainability and Cost
Conference Proceedings of the 1997 European Propulsion Conference, Berlin, (1997)
Duden, A., Fottner, L.:
Influence of Taper, Reynolds Number and Mach Number on the Secondary Flow of a Highly Loaded Turbine Cascade
Conf. Proc. of 2nd European Conference on Turbomachinery,
5-7 March, Antwerpen (1997)
Influence of Taper, Reynolds Number and Mach Number on the Secondary Flow of a Highly Loaded Turbine Cascade
Conf. Proc. of 2nd European Conference on Turbomachinery,
5-7 March, Antwerpen (1997)
1996
Hu, J., Fottner, L.:
Numerical Simulation of Active Suppression of Rotating Stall in Axial Compression Systems
Journ. of Thermal Science Vol. 5, No. 4, pp 231-242 (1996)
Numerical Simulation of Active Suppression of Rotating Stall in Axial Compression Systems
Journ. of Thermal Science Vol. 5, No. 4, pp 231-242 (1996)
Duden, A., Fottner, L., Braig, W., H.-F. Vogt, Raab, I., Sauer, H.:
Messungen an einer filmgekühlten Turbinenschaufelvorderkante
5. Statusseminar AG TURBO DLR Köln (1996)
Messungen an einer filmgekühlten Turbinenschaufelvorderkante
5. Statusseminar AG TURBO DLR Köln (1996)
Ardey, S., Fottner, L.:
Messungen an einer filmgekühlten Turbinenschaufelvorderkante
5. Statusseminar AG TURBO DLR Köln (1996)
Messungen an einer filmgekühlten Turbinenschaufelvorderkante
5. Statusseminar AG TURBO DLR Köln (1996)
Hildebrandt, Th., Fottner, L.:
Numerische Untersuchung der Strömung in einem hochbelasteten Axialverdichter mit unterschiedlichen 3D Navier-Stokes Verfahren
DGLR Jahrestagung Dresden (1996)
Numerische Untersuchung der Strömung in einem hochbelasteten Axialverdichter mit unterschiedlichen 3D Navier-Stokes Verfahren
DGLR Jahrestagung Dresden (1996)
Jahnen, W., Fottner, L.:
A New Multi-Stage Compressor Test Facility for Inlet Distortion Investigations
13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Zürich, September 1996
A New Multi-Stage Compressor Test Facility for Inlet Distortion Investigations
13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Zürich, September 1996
Ganzert, W., Fottner, L.:
WINPANDA - An Enhanced PC-Based Data Acquisition System for Wake and Profile Pressure Distribution Measurements at the High Speed Cascade Wind Tunnel
13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Zürich, September 1996
WINPANDA - An Enhanced PC-Based Data Acquisition System for Wake and Profile Pressure Distribution Measurements at the High Speed Cascade Wind Tunnel
13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Zürich, September 1996
Acton, P., Fottner, L.:
The Generation of Instationary Flow Conditions in the High Speed Cascade Wind Tunnel
13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Zürich, September 1996
The Generation of Instationary Flow Conditions in the High Speed Cascade Wind Tunnel
13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Zürich, September 1996
Hübner, J., Fottner, L.:
Influence of Tip Clearance, Aspect Ratio, Blade Loading and Inlet Boundary Layer on Secondary Losses in Compressor Cascades
ASME 96-GT-505 (1996)
Influence of Tip Clearance, Aspect Ratio, Blade Loading and Inlet Boundary Layer on Secondary Losses in Compressor Cascades
ASME 96-GT-505 (1996)
Wunderwald, D., Fottner, L.:
Experimental Investigation of Turbulence Structures in the Boundary Layer of a Highly Loaded Turbine Cascade
ASME 96-GT-249 (1996)
Experimental Investigation of Turbulence Structures in the Boundary Layer of a Highly Loaded Turbine Cascade
ASME 96-GT-249 (1996)
Hildebrandt, Th., Fottner, L.:
Durham Low Speed Turbine Cascade - Test Case 3
ERCOFTAC Workshop 08-11 January 1996, Courchevel (1996)
Durham Low Speed Turbine Cascade - Test Case 3
ERCOFTAC Workshop 08-11 January 1996, Courchevel (1996)
1995
Müller, J.E., Fottner, L.:
Numerical and Experimental Investigations of the Flow Field Inside the Intake Duct of a Combined Cycle Engine for Hypersonic Flight
Proc. of ASME Conf. on "Computational Fluid Dynamics in Aeropropulsion", San Francisco (1995)
Numerical and Experimental Investigations of the Flow Field Inside the Intake Duct of a Combined Cycle Engine for Hypersonic Flight
Proc. of ASME Conf. on "Computational Fluid Dynamics in Aeropropulsion", San Francisco (1995)
Müller, J.E., Fottner, L.:
Numerische und experimentelle Untersuchung des Strömungsfeldes im Einlaufkanal eines Hyperschall-Kombinationstriebwerks
DGLR Jahrestagung Bonn DGLR-JT95-072 (1995)
Numerische und experimentelle Untersuchung des Strömungsfeldes im Einlaufkanal eines Hyperschall-Kombinationstriebwerks
DGLR Jahrestagung Bonn DGLR-JT95-072 (1995)
Herpel, Th., Fottner, L.:
Transient Performance of Turbofan Engines with Respect to Unsteady Compressor Flow near the Stability Limit
ISABE Melbourne (1995)
Transient Performance of Turbofan Engines with Respect to Unsteady Compressor Flow near the Stability Limit
ISABE Melbourne (1995)
Vogel, D.T., Wilfert, G., Fottner, L.:
Numerical and Experimental Investigations of Film Cooling from a Row of Holes at the Suction Side of a Highly Loaded Turbine Blade
ISABE Melbourne (1995)
Numerical and Experimental Investigations of Film Cooling from a Row of Holes at the Suction Side of a Highly Loaded Turbine Blade
ISABE Melbourne (1995)
Ardey, S., Fottner, L.:
Strömungssichtbarmachung und Untersuchungen zum Verlustverhalten an einem Turbinenschaufelgitter mit Vorderkanten-Fimkühlung
DGLR FA TU Berlin (1995)
Strömungssichtbarmachung und Untersuchungen zum Verlustverhalten an einem Turbinenschaufelgitter mit Vorderkanten-Fimkühlung
DGLR FA TU Berlin (1995)
Wilfert, G., Fottner, L.:
Mischungsvorgänge zwischen Kühlfilmen und Gitterströmung an einem hochbelasteten Turbinengitter
DGLR FA TU Berlin (1995)
Mischungsvorgänge zwischen Kühlfilmen und Gitterströmung an einem hochbelasteten Turbinengitter
DGLR FA TU Berlin (1995)
Hu, J., Fottner, L.:
Calculations of Effects of Rotating Inlet Distortion on Flow Instabilities in Compression Systems
ASME 95-GT-196 (1995)
Calculations of Effects of Rotating Inlet Distortion on Flow Instabilities in Compression Systems
ASME 95-GT-196 (1995)
Wunderwald, D., Fottner, L.:
Experimental Investigation of Boundary Layer Transition and Turbulence Structures on a Highly Loaded Compressor Cascade
ASME 95-GT-129 (1995)
Experimental Investigation of Boundary Layer Transition and Turbulence Structures on a Highly Loaded Compressor Cascade
ASME 95-GT-129 (1995)
Bell, R.M., Fottner, L.:
Investigations of Shock/Boundary-Layer Interaction in a Highly Loaded Compressor Cascade
ASME 95-GT-84 (1995)
Investigations of Shock/Boundary-Layer Interaction in a Highly Loaded Compressor Cascade
ASME 95-GT-84 (1995)
Engber, M., Fottner, L.:
The Effect of Incoming Wakes on Boundary Layer Transition of a Highly Loaded Turbine Cascade
AGARD CP 571 (1995)
The Effect of Incoming Wakes on Boundary Layer Transition of a Highly Loaded Turbine Cascade
AGARD CP 571 (1995)
1994
Bell, R.M., Fottner, L.:
Schlieren Method with Quantitative Evaluation by Digital Image Processing
12th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Prague, September 1994
Schlieren Method with Quantitative Evaluation by Digital Image Processing
12th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Prague, September 1994
Acton, P., Fottner, L.:
The Generation of Isotropic Turbulence in the High Speed Cascade Wind Tunnel
12th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Prague, September 1994
The Generation of Isotropic Turbulence in the High Speed Cascade Wind Tunnel
12th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Prague, September 1994
König, W.M., Hennecke, D.K., Fottner, L.:
Improved Blade Profile Loss and Deviation Angle Models for Advanced Transonic Compressor Bladings
Part II: A Model for Supersonic Flow
ASME 94-GT-336 (1994)
Improved Blade Profile Loss and Deviation Angle Models for Advanced Transonic Compressor Bladings
Part II: A Model for Supersonic Flow
ASME 94-GT-336 (1994)
König, W.M., Hennecke, D.K., Fottner, L.:
Improved Blade Profile Loss and Deviation Angle Models for Advanced Transonic Compressor Bladings
Part I: A Model for Subsonic Flow
ASME 94-GT-335 (1994)
Improved Blade Profile Loss and Deviation Angle Models for Advanced Transonic Compressor Bladings
Part I: A Model for Subsonic Flow
ASME 94-GT-335 (1994)
Wilfert, G., Fottner, L.:
The Aerodynamic Mixing Effect of Discrete Cooling Jets with Mainstream Flow on a Highly Loaded Turbine Blade
ASME 94-GT-235 (1994)
Journ. of Turbomachinery Vol. 118 No. 3 (1996) pp 468-478
The Aerodynamic Mixing Effect of Discrete Cooling Jets with Mainstream Flow on a Highly Loaded Turbine Blade
ASME 94-GT-235 (1994)
Journ. of Turbomachinery Vol. 118 No. 3 (1996) pp 468-478
Hildebrandt, Th., Fottner, L.:
Durham Low Speed Turbine Cascade - 3D-Navier-Stokes Calculation
ERCOFTAC Workshop 10-13 January 1994, Val d'Isere (1994)
Durham Low Speed Turbine Cascade - 3D-Navier-Stokes Calculation
ERCOFTAC Workshop 10-13 January 1994, Val d'Isere (1994)
1993
Bernhard, D., Fottner, L.:
Einfluß kombinierter Drall- und Totaldruck-Eintrittsstörungen auf das Stabilitätsverhalten von Turbostrahltriebwerken
DGLR Jahrestagung Göttingen DGLR-JT93-047 (1993)
Einfluß kombinierter Drall- und Totaldruck-Eintrittsstörungen auf das Stabilitätsverhalten von Turbostrahltriebwerken
DGLR Jahrestagung Göttingen DGLR-JT93-047 (1993)
Herpel, Th., Fottner, L.:
A System for Monitoring, Measurement and Analysis of Transient Performance and Stall Phenomena of Gas Turbine Engines
Conf.Proc. Instrumentation in Aerospace Facilities, Saint-Louis (1993)
A System for Monitoring, Measurement and Analysis of Transient Performance and Stall Phenomena of Gas Turbine Engines
Conf.Proc. Instrumentation in Aerospace Facilities, Saint-Louis (1993)
Ladwig, M., Fottner, L.:
Experimental Investigations of the Influence of Incoming Wakes on the Losses of a Linear Turbine Cascade
ASME 93-GT-394 (1993)
Experimental Investigations of the Influence of Incoming Wakes on the Losses of a Linear Turbine Cascade
ASME 93-GT-394 (1993)
Sachmann, J., Fottner, L.:
Highly Loaded Tandem Compressor Cascade with Variable Camber and Stagger
ASME 93-GT-235 (1993)
Highly Loaded Tandem Compressor Cascade with Variable Camber and Stagger
ASME 93-GT-235 (1993)
Weiß, A.P., Fottner, L.:
The Influence of Load Distribution on Secondary Flow in Straight Turbine Cascades
ASME 93-GT-86 (1993)
Journ. of Turbomachinery Vol. 117 No. 1 (1995) pp 133-141
The Influence of Load Distribution on Secondary Flow in Straight Turbine Cascades
ASME 93-GT-86 (1993)
Journ. of Turbomachinery Vol. 117 No. 1 (1995) pp 133-141
Benz, E., Wittig, S., Beeck, A., Fottner, L.:
Analysis of Cooling Jets near the Leading Edge of Turbine Blades
AGARD CP 534 (1993)
Analysis of Cooling Jets near the Leading Edge of Turbine Blades
AGARD CP 534 (1993)
Weiß, A.P., Fottner, L.:
Die Auswirkungen unterschiedlicher Belastungsverteilungen von Turbinengittern auf die Energiedissipation und auf die Verteilung der Verluste und des Abströmwinkels über der Schaufelhöhe
DGLR-Fachausschuß-Sitzung Uni Stuttgart, 1993
Die Auswirkungen unterschiedlicher Belastungsverteilungen von Turbinengittern auf die Energiedissipation und auf die Verteilung der Verluste und des Abströmwinkels über der Schaufelhöhe
DGLR-Fachausschuß-Sitzung Uni Stuttgart, 1993
Fottner, L. (Edt.):
Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines
Conference Proceedings, Neubiberg, 1993
Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines
Conference Proceedings, Neubiberg, 1993
1992
Beeck, A., Fottner, L., Benz, E., Wittig, S.:
The Aerodynamic Effect of Coolant Ejection in the Leading Edge Region of a Film Cooled Turbine Blade
AGARD CP 527 (1992)
The Aerodynamic Effect of Coolant Ejection in the Leading Edge Region of a Film Cooled Turbine Blade
AGARD CP 527 (1992)
Wunderwald, D., Wilfert, G., Fottner, L.:
The Experimental Set-Up of a Triple-Sensor Anemometry and its Controlling System at the High-Speed Cascade Wind Tunnel
11th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Neubiberg, September 1992
The Experimental Set-Up of a Triple-Sensor Anemometry and its Controlling System at the High-Speed Cascade Wind Tunnel
11th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Neubiberg, September 1992
Fottner, L. (Edt.):
Steady and Transient Perfomarmance Prediction of Gas Turbine Engines
AGARD LS 183 (1992)
Steady and Transient Perfomarmance Prediction of Gas Turbine Engines
AGARD LS 183 (1992)
Watzlawick, R., Fottner, L.:
Bestimmung der wesentlichen Einflußgrößen in der Korrelation der Sekundärströmungsverluste bei Veränderung des Schaufelseitenverhältnisses
MTZ 53, Heft 6 (1992)
Bestimmung der wesentlichen Einflußgrößen in der Korrelation der Sekundärströmungsverluste bei Veränderung des Schaufelseitenverhältnisses
MTZ 53, Heft 6 (1992)
1991
Meyer, W., Pazur, W., Fottner, L.:
The Influence of Intake Swirl Distortion on the Steady-State Performance of a Low Bypass, Twin-Spool Engine
AGARD CP-498 (1991)
The Influence of Intake Swirl Distortion on the Steady-State Performance of a Low Bypass, Twin-Spool Engine
AGARD CP-498 (1991)
Berns, W., Fottner, L.:
Experimental Analysis of the Dynamic Performance of Turbojet Engines
ISABE Nottingham (1991)
Experimental Analysis of the Dynamic Performance of Turbojet Engines
ISABE Nottingham (1991)
Sturm, W., Scheugenpflug, H., Fottner, L.:
Performance Improvements of Compressor Cascades by Controlling the Profile and Sidewall Boundary-Layers
ASME 91-GT-260 (1991)
Performance Improvements of Compressor Cascades by Controlling the Profile and Sidewall Boundary-Layers
ASME 91-GT-260 (1991)
Watzlawick, R., Fottner, L.:
Bestimmung der wesentlichen Einflußgrößen in der Korrelation der Sekundärströmungsverluste bei Veränderung des Schaufelseitenverhältnisses
FVV Heft R 482 (1991)
Bestimmung der wesentlichen Einflußgrößen in der Korrelation der Sekundärströmungsverluste bei Veränderung des Schaufelseitenverhältnisses
FVV Heft R 482 (1991)
1990
Wilfert, G., Ladwig, M., Fottner, L.:
PANDA - A new Data Acquisition System for Wake and Profile Pressure Distribution Measurements at the High-Speed Cascade Wind Tunnel
10th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Brussel, September 1990
PANDA - A new Data Acquisition System for Wake and Profile Pressure Distribution Measurements at the High-Speed Cascade Wind Tunnel
10th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Brussel, September 1990
Pazur, W., Fottner, L.:
The Influence of Inlet Swirl Distortions on the Performance of a Jet Propulsion Two-Stage Axial Compressor
ASME 90-GT-147 (1990)
The Influence of Inlet Swirl Distortions on the Performance of a Jet Propulsion Two-Stage Axial Compressor
ASME 90-GT-147 (1990)
Fottner, L. (Edt.):
Test Cases for Computation of Internal Flows in Aero Engine Components
AGARD-AR-275 (1990)
Test Cases for Computation of Internal Flows in Aero Engine Components
AGARD-AR-275 (1990)
1989
Fottner, L.:
Overview on Test Cases for Computation of Internal Flows in Turbomachines
ASME 89-GT-46 (1989)
Overview on Test Cases for Computation of Internal Flows in Turbomachines
ASME 89-GT-46 (1989)
Fottner, L.:
Review of Turbomachinery Blading Design Problems
AGARD-LS-167 (1989)
Review of Turbomachinery Blading Design Problems
AGARD-LS-167 (1989)
Fottner, L. (Edt.):
Blading Design for Axial Turbomachines
AGARD-LS-167 (1989)
Blading Design for Axial Turbomachines
AGARD-LS-167 (1989)
1988 und früher
Römer, N., Ladwig, M., Fottner, L.:
Measuring Techniques at the High-Speed Cascade Windtunnel of the University of the Federal Armed Forces Munich
9th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Oxford, March 1988
Measuring Techniques at the High-Speed Cascade Windtunnel of the University of the Federal Armed Forces Munich
9th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Oxford, March 1988
Genssler,H.P., Meyer,W., Fottner, L.:
Development of Intake Swirl Generators for Turbo Jet Engine Testing
AGARD-CP-400 (1986)
Development of Intake Swirl Generators for Turbo Jet Engine Testing
AGARD-CP-400 (1986)
Hoheisel, H., Kiock, R., Lichtfuß, H.J., Fottner, L.:
Influence of Free Stream Turbulence and Blade Pressure Gradient on Boundary-Layer and Loss Behaviour of Turbine Cascades
ASME 86-GT-234 (1986)
Influence of Free Stream Turbulence and Blade Pressure Gradient on Boundary-Layer and Loss Behaviour of Turbine Cascades
ASME 86-GT-234 (1986)
Neuhoff, F., Shreeve, R.P., Fottner, L.:
Evaluation of the Blade-to-Blade Flow from a High-Speed Compressor Rotor
ASME 86-GT-117 (1986)
Evaluation of the Blade-to-Blade Flow from a High-Speed Compressor Rotor
ASME 86-GT-117 (1986)
Sturm, W., Fottner, L.:
The High-Speed Cascade Wind Tunnel of the German Armed Forces University Munich
8th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Genua, Oct. 1985
The High-Speed Cascade Wind Tunnel of the German Armed Forces University Munich
8th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turbomachines, Genua, Oct. 1985
Fottner, L.:
Advanced Design Concepts for Axial Compressors and Axial Turbines
Concepts 85. Conf. Proc. (1985)
Advanced Design Concepts for Axial Compressors and Axial Turbines
Concepts 85. Conf. Proc. (1985)
Fottner, L.:
Überblick über neue Beschaufelungskonzepte
DGLR FA Antriebe (1984)
Überblick über neue Beschaufelungskonzepte
DGLR FA Antriebe (1984)
Fottner, L.:
New Design Concepts for Bladings of Axial Turbomachines
15th ICAS Conf. Proc. (1983)
New Design Concepts for Bladings of Axial Turbomachines
15th ICAS Conf. Proc. (1983)
Fottner, L., Lichtfuß, H.-J.:
Design of Transonic Compressor Cascades for Minimal Shock Losses and Comparison with Test Results
AGARD Conf. Proc. CP 351 (1983)
Design of Transonic Compressor Cascades for Minimal Shock Losses and Comparison with Test Results
AGARD Conf. Proc. CP 351 (1983)
Schäffler, A., Fottner, L.:
Survey on the Effects of Blade Surface Roughness on Compressor Performance
AGARD AR 175 (1982)
Survey on the Effects of Blade Surface Roughness on Compressor Performance
AGARD AR 175 (1982)
Fottner, L.:
Survey of Models for Shock and Shock/Boundary-Layer Interaction Loss Prediction
AGARD AR 175 (1982)
Survey of Models for Shock and Shock/Boundary-Layer Interaction Loss Prediction
AGARD AR 175 (1982)
Fottner, L.:
Advanced Concepts in Turbomachinery
Lecture Series at the Fluid Dynamic Institute of Dartmouth College, Hanover, N.H. August, 17-21, 1981
Advanced Concepts in Turbomachinery
Lecture Series at the Fluid Dynamic Institute of Dartmouth College, Hanover, N.H. August, 17-21, 1981
Fottner, L.:
Vorausberechnung des Betriebsverhaltens von transsonischen Axialverdichtern
FVV-Kurzinformation 63/80 (1980)
Vorausberechnung des Betriebsverhaltens von transsonischen Axialverdichtern
FVV-Kurzinformation 63/80 (1980)
Fottner, L.:
Theoretical and Experimental Investigations on Aerodynamically Highly-Loaded Compressor Bladings with Boundary-Layer Control
ISABE Orlando, USA (1979)
Theoretical and Experimental Investigations on Aerodynamically Highly-Loaded Compressor Bladings with Boundary-Layer Control
ISABE Orlando, USA (1979)
Fottner, L.:
Aerodynamisch hochbelastete Verdichterbeschaufelung mit Grenzschichtbeeinflussung
Forschungsbericht aus der Wehrtechnik BMVg FBWT 77-4 (1977)
Aerodynamisch hochbelastete Verdichterbeschaufelung mit Grenzschichtbeeinflussung
Forschungsbericht aus der Wehrtechnik BMVg FBWT 77-4 (1977)
Fottner, L.:
Auslegungsgrundlagen für transsonische Axialverdichter
FVV-Kurzinformation
73/76 (1976)
Auslegungsgrundlagen für transsonische Axialverdichter
FVV-Kurzinformation
73/76 (1976)
Volkmann, H., Fottner, L., Scholz, N.:
Aerodynamische Entwicklung eines dreistufigen Transonik-Frontgebläses
ZfW 22 (1974), Heft 4, S. 135-144
Aerodynamische Entwicklung eines dreistufigen Transonik-Frontgebläses
ZfW 22 (1974), Heft 4, S. 135-144
Fottner, L.:
Semi-Empirical Methods for Transonic Flow in Turbomachinery
Lecture at VKI short course "Transonic Flow in Turbomachinery"
VKI LS 59 (1973), Brüssel
Semi-Empirical Methods for Transonic Flow in Turbomachinery
Lecture at VKI short course "Transonic Flow in Turbomachinery"
VKI LS 59 (1973), Brüssel
Fottner, L.:
Analytical Approach for the Loss and Deflection Behaviour of Cascades in Transonic Flow Including Axial Mass Flow Variation
AGARDograph No. 164 (1972)
Analytical Approach for the Loss and Deflection Behaviour of Cascades in Transonic Flow Including Axial Mass Flow Variation
AGARDograph No. 164 (1972)
Fottner, L.:
Ein Verfahren zum Bestimmen der verlustbehafteten transsonischen Schaufelgitterströmung bei vorgegebener Druckverteilung
Forschg.Ing.Wes. 38 (1972) Nr. 3, S. 69 - 81
Ein Verfahren zum Bestimmen der verlustbehafteten transsonischen Schaufelgitterströmung bei vorgegebener Druckverteilung
Forschg.Ing.Wes. 38 (1972) Nr. 3, S. 69 - 81
Fottner, L.:
Ein halbempirisches Verfahren zum Bestimmen der reibungsbehafteten transsonischen Schaufelgitterströmung mit Einschluß von Überschallfeldern und Verdichtungsstößen
Dissertation TU München (1970)
Kurzfassung in Forschg. Ing.Wes 36 (1970) Nr.4, S.101-110
Ein halbempirisches Verfahren zum Bestimmen der reibungsbehafteten transsonischen Schaufelgitterströmung mit Einschluß von Überschallfeldern und Verdichtungsstößen
Dissertation TU München (1970)
Kurzfassung in Forschg. Ing.Wes 36 (1970) Nr.4, S.101-110
Fottner, L.:
A Semi-Empirical Approach of the Transonic Flow Past Cascades Including Shock and Viscous Effects
AGARD Conf. Proc. No. 34 (1968)
A Semi-Empirical Approach of the Transonic Flow Past Cascades Including Shock and Viscous Effects
AGARD Conf. Proc. No. 34 (1968)